DGS-3312SR Layer 3 Gigabit Switch
203
show sim
members <member_id 1-32>
- Entering this parameter will display
information concerning members of the SIM group. To view a specific
member, include that member’s id number, listed from 1 to 32.
group commander_mac <macaddr>
- Entering this parameter will
display information concerning the SIM group of a commander device,
identified by its MAC address.
neighbor
– Entering this parameter will display neighboring devices of
the switch. A SIM neighbor is defined as a switch that is physically
connected to the switch but is not part of the SIM group. This screen
will produce the following results:
Port – Displays the physical port number of the commander
switch where the uplink to the neighbor switch is located.
MAC Address – Displays the MAC Address of the neighbor
switch.
Role – Displays the role (CS, CaS, MS) of the neighbor
switch.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To show the SIM information in detail:
DGS-3312SR:4#show sim
Command: show sim
SIM Version : VER-1
Firmware Version : Build 2.00-B17
Device Name :
MAC Address : 00-35-26-11-11-00
Capabilities : L3
Platform : DGS-3312SR L3 Switch
SIM State : Enabled
Role State : Commander
Discovery Interval : 30 sec
Hold Time : 100 sec
DGS-3312SR:4#
To show the candidate information in summary, if the candidate ID is specified:
DGS-3312SR:4#show sim candidates
Command: show sim candidates
ID MAC Address Platform / Hold Firmware Device Name
Capability Time Version
--- ----------------- ------------------------ ----- --------- ----------------
1 00-01-02-03-04-00 DGS-3212SR L2 Switch 40 3.00-B09 The Man
2 00-55-55-00-55-00 DGS-3212SR L2 Switch 140 3.00-B09 default master
Total Entries: 2
DGS-3312SR:4#
To show the member information in summary, if the member id is specified:
