DGS-3312SR Layer 3 Gigabit Switch
185
Example usage:
To configure the RADIUS settings:
DGS-3312SR:4#config radius 1 10.48.74.121 key dlink default
Command: config radius 1 10.48.74.121 key dlink default
Success.
DGS-3312SR:4#
show radius
Purpose
Used to display the current RADIUS configurations on the switch.
Syntax
show radius
Description
The
show radius
command is used to display the current
RADIUS configurations on the switch.
Parameters None.
Restrictions None.
Example usage:
To display RADIUS settings on the switch:
DGS-3312SR:4#show radius
Command: show radius
Index IP Address Auth-Port Acct-Port Status Key
Number Number
----- ------------------ --------- --------- ----------- ------------
1 10.1.1.1 1812 1813 Active switch
2 20.1.1.1 1800 1813 Active des3226
3 30.1.1.1 1812 1813 Active dlink
Total Entries : 3
DGS-3312SR:4#
