D-Link AC1200 User Manual Download

Page: 71 / 197

DIR-842V2

AC1200 Wi-Fi Gigabit Router

User Manual

Configuring via Web-based Interface

Page

Figure 66. The page for creating a new

Static IPv4

connection. The

IPv4

section.

Parameter

Description

IPv4

For

Static IPv4

type

IP address

Enter an IP address for this WAN connection.

Subnet mask

Enter a subnet mask for this WAN connection.

Gateway IP address

Enter an IP address of the gateway used by this WAN connection.

Primary DNS /

Secondary DNS

Enter addresses of the primary and secondary DNS servers in the
relevant fields.

For

Dynamic IPv4

type

Obtain DNS server

addresses

automatically

Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the

Primary DNS

and

Secondary DNS

fields are not available for editing.

Primary DNS /

Secondary DNS

Enter addresses of the primary and secondary DNS servers in the
relevant fields.

Vendor ID

The identifier of your ISP.

Optional

Hostname

A name of the router specified by your ISP.

Optional

When all needed settings are configured, click the

APPLY

button.

Summary of Contents for AC1200






































































































































































































Search results

Summary of Contents for AC1200

Reviews:

Related manuals for AC1200

Brands by name

Popular brands

D-Link AC1200, User Manual

Search results

Summary of Contents for AC1200

Reviews:

Related manuals for AC1200

Brands by name

Popular brands