DIR-842V2
AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
Page
138
In the opened window, you can specify the following parameters:
Parameter
Description
Frequency band
From the drop-down list, select a band of the wireless network.
SSID
A wireless network to which the rule will be applied. Select the
needed value from the drop-down list.
Enabled
If the switch is moved to the right, the rule is active.
Move the switch to the left to disable the rule.
MAC address
In the field, enter the MAC address to which the rule will be
applied. You can enter the MAC address of a device connected to
the router's LAN at the moment. To do this, select the relevant
device from the drop-down list (the field will be filled in
automatically).
Upload
Maximum rate
Specify the maximum value of the upstream traffic rate (Mbit/s) or
move the
Not limited
switch to the right not to limit the maximum
bandwidth of upstream traffic.
Download
Maximum rate
Specify the maximum value of the downstream traffic rate (Mbit/s)
or move the
Not limited
switch to the right not to limit the
maximum bandwidth of downstream traffic.
After specifying the needed parameters, click the
SAVE
button.
To edit a rule, left-click the relevant rule. In the opened window, change the needed parameters and
click the
SAVE
button.
To remove a rule, select the checkbox located to the left of the relevant line in the table and click
the
DELETE
button ( ).
