D-Link AC1200 User Manual Download Page 61

Page: 61 / 197

DIR-842V2

AC1200 Wi-Fi Gigabit Router

User Manual

Configuring via Web-based Interface

Page

Configuring Wireless Network

This configuration step is available for the

Mobile Internet, Router

Access point

WISP

Repeater

, and

Repeater

modes.

On the

Wireless Network 2.4 GHz

page, in the

Network name

field, specify your own

name for the wireless network in the 2.4GHz band or leave the value suggested by the
router.

In the

Password

field, specify your own password for access to the wireless network or

leave the value suggested by the router (WPS PIN of the device, see the barcode label).

If the router is used as a Wi-Fi client, you can specify the same parameters of the wireless
network as specified for the network to which you are connecting. To do this, click the

USE

button (available for the

WISP Repeater

and

Repeater

modes only).

You can restore the parameters of the wireless network specified before resetting to factory

defaults. To do this, click the

RESTORE

button.

Figure 56. The page for configuring the wireless network.

Summary of Contents for AC1200






































































































































































































Search results

Summary of Contents for AC1200

Reviews:

Related manuals for AC1200

Brands by name

Popular brands

D-Link AC1200, User Manual

Search results

Summary of Contents for AC1200

Reviews:

Related manuals for AC1200

Brands by name

Popular brands