DIR-842V2
AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
Page
73
Parameter
Description
RIPng
Move the switch to the right to allow using RIPng for this
connection.
Figure 68. The page for creating a new
Static IPv6
connection. The
Ethernet
section.
Parameter
Description
Ethernet
MAC address
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
To set the MAC address of the network interface card (of the
computer that is being used to configure the router at the moment)
as the MAC address of the WAN interface, move the
Clone MAC
address of your NIC
switch to the right. When the switch is
moved to the right, the field is unavailable for editing.
To set the router's MAC address, click the
RESTORE DEFAULT
MAC ADDRESS
button (the button is available when the switch is
moved to the right).
MTU
The maximum size of units transmitted by the interface.
