D-Link AC1200 User Manual Download

Page: 108 / 197

DIR-842V2

AC1200 Wi-Fi Gigabit Router

User Manual

Configuring via Web-based Interface

Page

108

Parameter

Description

802.11w (Protected

Management Frames)

For

WPA2-PSK

WPA3-SAE

, and

WPA2-PSK/WPA3-SAE

mixed

authentication types only.

Protected Management Frames help to improve packet privacy

protection for wireless data transmission. Select a value for the

wireless network from the drop-down list.

•

Disabled

: Protected Management Frames are not used.

•

Optional

: Protected Management Frames are optional.

•

Required

: Protected Management Frames are required.

When this value is selected, devices not supporting the

802.11w standard cannot connect to the wireless network.

The default value cannot be changed for

WPA3-SAE

and

WPA2-

PSK/WPA3-SAE mixed

authentication types.

When the

WPA

WPA2

, or

WPA/WPA2 mixed

value is selected, the following settings are

displayed on the page:

Figure 97. The

WPA2

value is selected from the

Network authentication

drop-down list.

Parameter

Description

WPA2 Pre-

authentication

Move the switch to the right to activate preliminary authentication
(displayed only for the

WPA2

and

WPA/WPA2 mixed

authentication types).

IP address RADIUS

server

The IP address of the RADIUS server.

Summary of Contents for AC1200






































































































































































































Search results

Summary of Contents for AC1200

Reviews:

Related manuals for AC1200

Brands by name

Popular brands

D-Link AC1200, User Manual

Search results

Summary of Contents for AC1200

Reviews:

Related manuals for AC1200

Brands by name

Popular brands