D-Link AC1200 User Manual Download

Page: 67 / 197

DIR-842V2

AC1200 Wi-Fi Gigabit Router

User Manual

Configuring via Web-based Interface

Page

Settings / Internet

WAN

On the

Settings / Internet / WAN

page, you can create and edit connections used by the router.

By default, a

Dynamic IPv4

connection is configured in the system. It is assigned to the

WAN

port of the router.

Figure 62. The

Settings / Internet / WAN

page. The simplified mode.

To edit an existing connection, click the

EDIT

button. Change the needed parameters and click the

APPLY

button.

To disconnect a connection and establish it again, click the

RECONNECT

button.

To remove an existing connection and create a new one, click the

CHANGE CONFIGURATION

button. Upon that the connection creation page opens.
To create several WAN connections, go to the advanced mode. To do this, click the

ADVANCED

MODE

button.

When connections of some types are created, the

Settings / Internet / WAN

page is

automatically displayed in the advanced mode.

Summary of Contents for AC1200






































































































































































































Search results

Summary of Contents for AC1200

Reviews:

Related manuals for AC1200

Brands by name

Popular brands

D-Link AC1200, User Manual

Search results

Summary of Contents for AC1200

Reviews:

Related manuals for AC1200

Brands by name

Popular brands