DIR-842V2
AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
Page
114
In the
Static IP Addresses
section, you can specify MAC address and IPv4 address pairs (set a
fixed IPv4 address in the local area network for a device with a certain MAC address). The router
assigns IPv4 addresses in accordance with the specified pairs only when the DHCP server is
enabled (in the
Dynamic IP Addresses
section, the
Server
value is selected from the
Mode of
dynamic IP address assignment
drop-down list).
Figure 102. Configuring the local interface. The
IPv4
tab. The section for creating MAC-IPv4 pairs.
To create a MAC-IPv4 pair, click the
ADD
button ( ). In the opened window, fill in the
MAC
address
field. You can choose a device connected to the router's LAN at the moment. To do this,
select the relevant MAC address from the drop-down list (the field will be filled in automatically).
Then in the
IP address
field, enter an IPv4 address which will be assigned to the device with the
specified MAC address. In the
Hostname
field, specify a network name of the device for easier
identification (
optional
). Click the
APPLY
button.
To create MAC-IPv4 pairs for the devices connected to the router at the moment, click the
KNOWN CLIENTS
button. In the opened window, select the needed device and click the
OK
button. To view the latest list of the connected devices, click the
REFRESH
button.
To edit the settings for an existing MAC-IPv4 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the
APPLY
button.
To remove a MAC-IPv4 pair, select the checkbox located to the left of the relevant line in the table
and click the
DELETE
button ( ). Then click the
APPLY
button. Also you can remove a pair in
the editing window.
