DIR-842V2
AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
Page
68
Figure 63. The
Settings / Internet / WAN
page. The advanced mode.
To create a new connection, click the
ADD
button ( ) in the
Connections List
section. Upon
that the connection creation page opens.
To edit an existing connection, in the
Connections List
section, left-click the relevant line in the
table. Change the needed parameters and click the
APPLY
button.
To disconnect a connection and establish it again, select the checkbox located to the left of the
relevant line in the table and click the
RECONNECT
button.
To remove a connection, in the
Connections List
section, select the checkbox located to the left
of the relevant line in the table and click the
DELETE
button ( ).
To allow multicast traffic (e.g. streaming video) for a connection, click the
IGMP/MLD
link (for the
description of the page, see the
To use one of existing WAN connections as the default IPv4 or IPv6 connection, in the
Default
Gateway
section, select the choice of the radio button which corresponds to this connection.
To return to the simplified mode, click the
SIMPLIFIED MODE
button (the button is unavailable if
several WAN connections are created).
