DIR-842V2
AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
Page
158
You can specify the following parameters:
Parameter
Description
Enable
Move the switch to the right to enable the tunnel.
Move the switch to the left to disable the tunnel.
General Settings
Name
A name for the tunnel for easier identification. Use digits, Latin letters
(uppercase and/or lowercase), and other characters available in the US
keyboard layout.
IP version
An IP version.
Dynamic IPsec
Move the switch to the right to allow a remote host with any public IP
address to connect to the router via IPsec protocol. Such a setting can
be specified for one IPsec tunnel only. Connection requests via this
tunnel can be sent by a remote host only.
Type
Select an identification method for the remote host (router) from the
drop-down list:
•
Address
: The remote host is identified by its IP address.
•
FQDN
: The remote host is identified by its domain name.
The drop-down list is displayed if the
Dynamic IPsec
switch is
moved to the left.
Remote host
Enter the remote subnet VPN gateway IP address if the
Address
value is selected from the
Type
drop-down list.
Enter the remote subnet VPN gateway domain name if the
FQDN
value is selected from the
Type
drop-down list.
The field is available for editing if the
Dynamic IPsec
switch is
moved to the left.
Remote identifier
A remote host identifier to establish connection over IPsec
with particular hosts only. To establish connection, DIR-842V2
remote identifier value should correspond to the local
identifier value specified in the settings of the remote host. Use an IP
address, domain name, or certificate CN.
Optional.
16 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
