D-Link AC1200 User Manual Download

Page: 66 / 197

DIR-842V2

AC1200 Wi-Fi Gigabit Router

User Manual

Configuring via Web-based Interface

Page

If the Wizard has configured a WAN connection, after clicking the

APPLY

button, the page for

checking the Internet availability opens.

Figure 61. Checking the Internet availability.

If problems appeared when connecting to the Internet, click the

CHECK AGAIN

button to recheck

the state of the WAN connection.

If problems of connection have not been solved, contact the technical support of your ISP (as a rule,
the technical support phone is provided with the agreement) or the D-Link technical support.

To specify other settings, click the

ADVANCED SETTINGS

button. After clicking the

ADVANCED SETTINGS

button, the

Home

page opens (see the

Home Page

section, page 42).

Summary of Contents for AC1200






































































































































































































Search results

Summary of Contents for AC1200

Reviews:

Related manuals for AC1200

Brands by name

Popular brands

D-Link AC1200, User Manual

Search results

Summary of Contents for AC1200

Reviews:

Related manuals for AC1200

Brands by name

Popular brands