Specifications
Specifications subject to change without notice.
Maximum Distance*
2,500 feet
Bandwidth
20 Hz to 20 kHz
Impedance
600 ohms, balanced
Isolation
500 V
Nominal Level
1.0 volts
Insertion Loss
1 dB
Common Mode Rejection
Greater than 40 dB
Unshielded Twisted Pair
Maximum capacitance: 20 pf/foot
Cabling Specifications
Impedance: 100 ohms @ 1 MHz
(24 gauge or lower solid
Attenuation: 6.6 dB/1000 ft. @ 1 MHz
copper)
Cat 3, Cat 5, Cat 5e, Cat 6, Cat 7 compatible
Connectors
One (2) female 1/8” mini to one (1) RJ45
RJ45 Pinout
Channel 1 (R): 1 & 2, pair 2
Channel 2 (L): 3 & 6, pair 3
Temperature
Operating: 32 to 131 F (0 to 55 C)
Storage: -4 to 185 F (-20 to 85 C)
Humidity: up to 95%
Enclosure
Font: standard decora-style wallplate
Rear: metal
Dimensions
4.0” x 1.4” x 1.7”
Weight
0.2 lbs (3.2 oz.)
Ordering Information
AVO-A2MINI-WP-F
: single AVO-A2MINI-WP-F balun
in bulk packaging
Warranty
2 years
*
Distances and picture quality may be affected by cable grade, cable quality, source and
destination equipment, RF and electrical interference, and cable patches. Intelix specifications are
based on straight-through cabling with standard-grade Cat 5.
Contact Information
Intelix
2222 Pleasant View Road
Middleton, WI 53562
Toll-free: 866-4-MATMIX
Phone: 608-831-0880
Fax: 608-831-1833
www.intelix.com
Intelix AVO-A2-MINI-WP-F Stereo Audio Balun
Installation Manual
Installation Manual
Installation Manual
Installation Manual
Installation Manual
The Intelix AVO-A2MINI-WP-F wallplate balun transmits ste-
reo analog audio via standard structured cabling, such as Cat 5.
Used in pairs or with a rack-mountable Intelix AVO-A2 balun,
the AVO-A2MINI-WP-F features an 1/8” mini (typical head-
phone) jack and transmits analog audio in either direction up to
2,500 feet. The AVO-A2MINI-WP-F is ideal for transmitting
computer and .mp3 player audio.
The Intelix
Avo
Cat
Series of baluns is the ideal solution for sending audio and
video over structured cabling.
When signal quality matters, choose Intelix.
To install an AVO-A2MINI-WP-F balun, perform the following steps:
1. Turn off power and disconnect the audio equipment by following the manufacturer’s
instructions.
2. Make certain that outlets and cross connects to which you will connect the AVO-
A2MINI-WP-F are configured properly and labeled appropriately to identify the
circuit.
3. Verify the desired twisted pairs are not being used for other LAN or telephony
equipment.
4. Connect the RCA outputs from the source equipment to the AVO-A2MINI-
WP-F. Connect the RCA inputs from the receive input to a second AVO-A2MINI-
WP-F or another compatible Intelix balun, such as the AVO-A2-F.
5. Connect the two baluns with a structured cable with RJ45 connectors, such as
Cat 5. Verify the cable’s pinout conforms to EIA/TIA 568A or 568B pattern
standards.
6. Power on the source and destination equipment and test for correct operation.
Installation
Caution:
Do not attempt to disassemble or alter the balun housing. There are
no user-serviceable parts inside the AVO-A2MINI-WP-F. Modifying
the unit will void your warranty.
Caution:
Do not mount the balun over equipment ventilation openings. Covering the
openings may cause the equipment to overheat.
Avo
Cat
Series
Caution:
Do not connect the AVO-A2MINI-WP-F to a telecommunication
outlet wired to unrelated equipment. Making such a connection may
damage the equipment and/or balun. Please ensure all wiring is
“straight-through.”
