CynkoMet RS-1500, Instructions For Use And Operation

Page: 59 / 101

Cynko Met
RS-1500
59
strictly to the guidelines described in section “6. Technical Support”.
Moreover, strictly:
• leave the connection to the tractor in order to ensure stability,
•
switch off the tractor's engine and remove the keys from the ignition,
• disconnect the PTO,
•
remove the cause of the adapter's blockade,
•
connect the PTO,
•
take special caution when restarting the machine.
Possible causes of no adapter drum revolutions:
1. Hard object (stone) jammed between drums.
2. Damage of gears interlocking with the drive chain.
3. Chain fell off from gears.
4. Jamming of floor conveyor.
5. Problems with the drive system
6.11 Troubleshooting
Table 8. Faults and remedies
Failure Reason Way of removal
Problems with moving
Connections leakage
Tighten, replace washers,
seal sets, replace the hoses.
Noise in the hub of
the driving
Axle
Excessive clearance on the
bearings
Check clearance and adjust if
necessary
defective bearings replace bearings
damaged items Replace
Excessive heating of
driving axle hub
Insufficient wheel bearing play
Adjust according to
instructions