CynkoMet RS-1500, Instructions For Use And Operation

Page: 2 / 101

Cynko Met
RS-1500
2
information on significant design changes are communicated to the user by means of
enclosed information (annexes).
Comments and observations about the design and operation of the machine
should be sent to the manufacturer. This information will allow objective evaluation of
the machine, and serve as guidelines in their further modernization.
NOTE!
NOTE!
Before the operation, the user should be familiar with this
manual and follow all recommendations. This will ensure safe
maintenance and trouble-free operation of the machine.
According to the Regulation of the Minister of Infrastructure of 31 December
2002 on the technical conditions of vehicles and obligatory equipment, the
manufacturer announces that the agricultural tractors and low-speed vehicles, and
trailers designed to connect with these vehicles should be marked with a distinctive
plate (section 3.6, figure 2). The plates are not required when the vehicle is included in
the kit and is the last vehicle in the set.
In accordance with the above Regulation, the manufacturer has equipped the
spreader with a plate holder.
The RS-1500 spreader is not compliant with the rules of moving on public roads
by machines with a speed of up to 30[km/h] (Act on Road Traffic Law of 20 June
1997). The manufacturer warns that driving on public roads is prohibited.
If the information contained in the manual will prove to be insufficient or not fully
understandable, it is advisable to seek help at the sales point in which the machine
was purchased or go directly to the manufacturer.