CynkoMet RS-1500, Instructions For Use And Operation

Page: 53 / 101

Cynko Met
RS-1500
53
6.6 Maintenance of electrical installation.
The work connected with the repair, replacement or regeneration of electrical
components should be entrusted to specialized workshops, which have the
appropriate technology and qualifications for this type of work.
The duties of the user include only:
•
technical inspection of the electrical installation and reflectors.
•
replacing light bulbs.
NOTE!
NOTE!
Driving with a faulty lighting system is prohibited. Damaged
shades, and burned-out bulbs must be replaced immediately
before driving. Lost or damaged reflective lights must be
replaced with new ones.
6.7 Lubrication
Lubrication of the spreader is to be performed at the points listed in table 8,
shown in figure 19.
Table 8. The frequency and method of lubrication of the spreader’s mechanisms
Item
no.
PLACE OF
LUBRICATION
NUMBER OF
POINTS
GREASE TYPE LUBRICATION NOTES
1 Wheel hub 2 ŁT 43
Bearings are to be lubricated
after removal of old grease.
2
Conveyor's star
wheels, rotary latch
6 ŁT 43
Before every standstill of greater
length and winter storage.
3 Drive chains 2 ŁT 43 / AGROL U
After spring and autumn
operations are concluded.
4 Transmission 1 AGROL U
Replacement immediately after
completing work with the
spreader.
5
Bearings of the
conveyor’s rear shaft
2 ŁT 43
6 Latches 2 ŁT 43