CynkoMet RS-1500, Instructions For Use And Operation

Page: 15 / 101

Cynko Met
RS-1500
15
•
It is forbidden to use the spreader in non-compliance to its purposes. The staff operating the
machine should strictly observe basic occupational health and safety rules.
•
Prior to every use of the spreader, check its technical condition, especially the condition of the
coupling system, drive system, and light signaling system.
•
The machine is marked with information and warning inscriptions in the form of stickers as
specified in table no. 1. The user is obliged to constantly take care of the readability of signs
and warning symbols on the machine.
In the event of damage or destruction replace them with new ones. Labels with inscriptions
and symbols are available from the manufacturer.
•
It is prohibited to spread material contaminated with hard materials (e.g.: scrap metal, stones,
bricks, etc.) or elements that may catch in the machine's mechanism (e.g.: rope, rags).
3.2 Attaching and detaching the machine to the tractor
•
Before attaching the spreader, make sure that the tractor and spreader are technically
efficient.
•
The turning hitch is adapted for cooperation with the three-point hitch of class 2
tractors.
•
When connecting the spreader, use only the intended trailer hitch in accordance with
the instruction manual of the tractor.
After completion of the machine coupling, check the security of the hitch. Read the
whole manual for the tractor's use If the tractor is equipped with an automatic hitch,
make sure the coupling operation has been completed correctly.
•
Be very careful when you connect the machine.
•
The presence of persons on the spreader’s cargo bed and between machines during
coupling is strictly prohibited. The adjustable drawbar support must always be used.
•
Coupling and uncoupling of the spreader may only take place when the machine is
immobilized using wedges.
3.3 Road wheels
•
When working with the driving wheels (wheel replacement) - always secure the spreader