CynkoMet RS-1500, Instructions For Use And Operation

Page: 16 / 101

Cynko Met
RS-1500
16
against uncontrolled movement by means of wedges laid under the wheels.
•
Wheel replacement is to be performed on a stable surface, in order to prevent dropping of
the jack or other wheels.
•
Repair work should be performed using the appropriate tools.
•
After each every installation of a wheel, tighten the fastening nuts after the first 10 working
hours, then check their tightness every 50 working hours.
• Inspect air pressure regularly.
•
Dismantling the wheels can be carried out only in the case when the spreader is not
loaded.
•
Avoid damaged road surface, quick and variable maneuvers and high speed during
turns.
•
Tire valves are to be protected with caps to prevent penetration of impurities.
3.4 Hydraulic installation
•
During work, the hydraulic system is under high pressure.
•
Check the technical condition of hydraulic hose connections regularly. Oil leaks are a
sign of damage to the system, making further use of the machine impossible.
•
In case of failure of the hydraulic installation, the spreader should be out of operation
until failure removal.
•
When connecting hydraulic hoses to the tractor, remember that the hydraulic system
of both machines must not be under pressure. If necessary, reduce the pressure in the
system so as to enable connection.
•
In the case of injury by a jet of hydraulic oil, consult a physician immediately. Hydraulic
oil may cause infections if it penetrates into the body. In the event of eye
contamination, wash eyes with a large amount of water and consult a physician.
• In the event of contact of oil with skin, wash the dirty spot with soap and water. Do
not use organic solvents (petrol, kerosene).
•
Use the hydraulic oil recommended by the manufacturer.
•
After replacing the hydraulic oil, the used oil must be disposed of. Used oil is to be
stored in its original containers or in hydrocarbon-resistant substitute packages.
Replacement containers must be carefully described and stored properly.
•
It is forbidden to store hydraulic oil in packaging designed for food storage.