CynkoMet RS-1500, Instructions For Use And Operation

Page: 50 / 101

Cynko Met
RS-1500
50
Figure 17. Spreading directions – rear flap of adapter
A – spreading in backward and side directions
B – spreading in side direction
After connecting the hydraulic system, make sure that this was done correctly.
In this case, connection of the feed and return to the tractor is interchangeable. If you
observe a leak between the hose and valve, remove the leak before starting work.
Before starting the conveyor, first start the rotary plates and set their speed
adequately to the spread material and conveyor's rate of advance. Otherwise, there is
a risk of clogging the adapter.
Adjustment for own material should be started from the 3rd speed of the
conveyor and from the 4th level on the flow regulator on the front of the spreader.
Excessive rotary speed, in the case of heavy material, may cause damage to plates or
the hydraulic system.
A
B