CynkoMet RS-1500, Instructions For Use And Operation

Page: 37 / 101

Cynko Met
RS-1500
37
NOTE!
NOTE!
Connecting the spreader to a hitch other than the original
transport hitch is unacceptable because it threatens the safety of
road traffic and to third parties.
After completion of the machine coupling, check the security of
the hitch.
In order to disconnect the spreader from the tractor, perform the following
steps:
•
switch off the engine and remove the keys from the ignition
•
place chocks under the wheels.
•
disconnect the hydraulic and electrical cables of the spreader from the tractor.
•
decouple the drawbar from the tractor's transport hitch/lower suspension points and
drive the tractor away.
NOTE!
NOTE!
When disconnecting the spreader from the tractor, keep
particular caution.
Provide yourself a good visibility. Before disconnecting the hoses
and rods, the cabin of the tractor must be closed to prevent it
from unauthorized access. The tractor engine is to be turned off
and remove the key from the ignition.
NOTE!
NOTE!
Pay attention to the compatibility of oils in the tractor hydraulic
system and the hydraulic system of the spreader.
4.3.5 Loading the cargo box.
NOTE!
NOTE!
Loading of the cargo bed can take place only when the spreader is
connected to the tractor, set on level ground, and when the parking
brake is engaged on the tractor and chocks are placed under the
spreader’s wheels.
You should aim for even load distribution in the loading crate.