CynkoMet RS-1500, Instructions For Use And Operation

Page: 65 / 101

Cynko Met
RS-1500
65
contact of the owner of the machine, its name, serial number, purchase date and a
description of the complaint.
3) Parts subject to wear during exploitation are not covered by the warranty e.g. tires,
brake linings, lighting, damage caused by external causes, such as: mechanical
injuries, improper handling, as well as the operation incompatible with the intended
purpose.
4) This manual does not allow you to make changes, alterations, modifications to the
discretion of the Customer without consulting with the manufacturer.
Detailed warranty conditions are mentioned in the warranty card attached to each
newly purchased machine.
NOTE!
NOTE!
It is advisable to require from the seller to fill in the warranty
card and reclamation coupons. Lack of e.g. the date of sale or
point of sale stamp exposes the user to non-recognition of any
complaints.
10. Environmental hazard
Hydraulic oil leakage is a direct threat to the environment because of the limited
biodegradability of the substance.
The created layer of oil on the water can a result of direct physical action on
organisms, can cause change in the oxygen content in the water due to absence of
direct contact of the air with water.
Maintenance - repair work at the time of which there is a risk of leakage should
be performed in rooms with oil resistant surface.
In the event of an oil spill, you must first secure the source of the leak, and then
collect the spilled oil using available means. Collect the oil residues using sorbents, or
mix the oil with sand, sawdust or other absorbent materials. The collected oil waste
should be kept in a sealed and marked container, resistant to hydrocarbons. The
container should be kept away from heat sources, flammable materials and food.