Page 1 of 5
Access Control and Telephone Entry
1. GENERAL DESCRIPTION
A key component of a physical security electronic access control
system, a mobile-ready reader combining BLE and contactless
smart card technologies is based on RFID technology.
In operation it is capable of reading data stored on a contactless
smartcard credential via high frequency—or reading data from
mobile credential stored in a smartphone’s wallet app via BLE
technology—and without physical contact, and then passing
the data obtained to the physical access control system.
Access control systems typically manage and record the movement
of individuals through a protected area, such as a locked door.
CV-7600 Series-BLE
Bluetooth Card Reader
INSTALLATION INSTRUCTIONS
2- #6 x 1" Self-Tapping Screws
2- 6-32 x 1" Pan Head Phillips Screws
1- Single Gang Mounting Plate
THIS PACKAGE INCLUDES:
3. SPECIFICATIONS
(WITH CARD READER DRAWING)
Input Voltage
8 to 14V AC/DC
Current Draw
40 mA typical @ 12VDC 195 mA peak
Frequency
13.56 MHz (contactless smartcard) 2.4 GHz (BLE)
Cabling
24 AWG minimum, multi-conductor stranded
with foil shield
Interface
Wiegand (26-bit formats), ABA Track II
magnetic strike (clock & data) or OSDP
Operating
Temperature
-40°F to 149°F (-40°C to 65°C)
LED Control
Blue, Red, Green, Amber and Off
Read Range
Physical:
Up to 1.5" (38mm)
Mobile:
CV-7600: Up to 1 ft (30 cm)
CV-7615: Up to 15 ft (4.6 m)
Audio Tone
Beeper included standard
Protection
IP67
Dimensions
Mullion:
1 3/4"W x 11/16"H x 1 13/16"D
(44mm x 119mm x 30mm)
Switch Plate:
3"W x 5 1/8"H x 1 3/16"D
(76mm x 130mm x 30mm)
Notes:
1. Optimized for use with devices supporting BLE version 4.2.
2. Carrying the ETL Label and tested by Intertek, conforms to
UL Standard 294.
3. Self evaluated.
4. Linear power supplies are recommended for best operation.
5. Using CV-MCS Clamshell Contactless Smartcard with 12 VDC at
the reader (other credentials may be less). Read ranges subject
to the smartphone used, the manner in which used, as well as
the installation and it's environment.
6. Ex. Belden 9535 or similar, supporting the five conductors
comprising the physical layer of the Wiegand interface (power,
ground, data 0, data 1, and/or beeper and LED). Alternatively,
Belden 9539 or similar, for all reader functions. Contact your
access control system manufacturer for specific requirements.
7. CSN = Card Serial Number
1- 6-32 x 1/4" Pan Head Phillips Screw
1- 6-32 x 1/4" Tamper-Resistant Button Head Hex Drive Screw
2. CONEKT WALLET APP
Instructions:
1) Using the target smartphone, download and install the
Conekt Wallet App. The App can be found on the Apple Store or
Google Play Store or by the following link:
http://onelink.to/sb6srb
2) Once installed, launch the Conekt Wallet App, then select the
"+" button to load a new Conekt Mobile Access Credential.
3) When prompted, enter the 16- character Conekt Registration
Key. This will download and activate the Conekt Mobile
Credential. The Conekt Registration Key may be manually
entered or, using the associated QR code, scanned with the
smartphone's camera.
4) The Conekt Mobile Access Credential will now appear in the
Conekt Wallet App, ready to use.
