Cupra ATECA, Owner'S Manual, Page: 77 / 380

Instruments and warning/control lamps
If necessary, use the engine oil tempera-
ture*
›››
page 68 as a guide.
●
Additional lights and other accessories in
front of the air inlet reduce the cooling ef-
fect of the coolant. At high outside temper-
atures and high engine loads, there is a risk
of the engine overheating.
●
The front spoiler also ensures proper dis-
tribution of the cooling air when the vehi-
cle is moving. If the spoiler is damaged this
can reduce the cooling effect, which could
cause the engine to overheat. Seek special-
ist assistance.
Service intervals
The service interval indication appears on
the instrument panel display and the Info-
tainment system.
There are different versions of instrument
panels and infotainment systems, so the ver-
sions and instructions on the screens may
vary.
CUPRA distinguishes between services with
engine oil change (e.g. Oil change service)
and services without engine oil change (e.g.
Inspection).
In vehicles with Services established by
time or mileage , the service intervals are al-
ready pre-defined.
In vehicles with
LongLife Service
, the inter-
vals are determined individually. Thanks to
technological progress, maintenance work
has been greatly reduced. Because of the
technology used by CUPRA, with this service
you only need to change the oil when the ve-
hicle so requires. To calculate this variation
(max. 2 years), the vehicle's conditions of use
and individual driving styles are considered.
The advance warning first appears 20 days
before the date established for the corre-
sponding service. The kilometres (miles) re-
maining until the next service are always
rounded up to the nearest 100 km (miles)
and the time is given in complete days. The
current service message cannot be viewed
until 500 km after the last service. Prior to
this, only lines are visible on the display.
Inspection reminder
If a service or an inspection has to be carried
out soon, a
service reminder will be dis-
played when the ignition is switched on.
The figure displayed are the kilometres that
can still be travelled or the time until the next
service.
Service due
When the time for a service or an inspec-
tion
comes, an audible warning will be emit-
ted when the ignition is switched on and the
fixed key symbol

may appear on the in-
strument panel for a few seconds, along with
one of the following messages:
● Service now!
● Please have your vehicle inspec-
ted.
● Oil change service due!
● Oil change service and inspection
due!
Consult a service notification
With the ignition switched on, the engine off
and the vehicle at a standstill, the current
service notification can be read:
Check the date of the current service on the
infotainment system
●
Press the infotainment

button.
●
Press the
SETTINGS
function button
›››
page 80 .
● Select the
Service
menu option to display
information about the services.
Checking the date on the digital instrument
panel
●
The date of the service can only be read
through the Service menu
›››
page 66
.
Resetting service interval display
If the service was not carried out by a speci-
alised CUPRA dealer or SEAT dealership, the
display can be reset as follows:
»
75