Cupra ATECA, Owner'S Manual, Page: 293 / 380

Help with parking and manoeuvring
●
If you use high-pressure or vapour equip-
ment for cleaning, do not apply it directly,
unless you do so very briefly, and always
keep a distance of more than 10 cm away.
●
Fitting certain accessories to the front of
the vehicle, such as a plate holder with ad-
vertising, may interfere with the operation
of the Park Assist.
●
We recommend that you practice parking
in an area without traffic.
●
The volume and tone of the signals and
indications can be changed
›››
page 295 .
●
Please observe information on towing a
trailer
›››
page 295 .
Parking System Plus*
Description
Fig. 238
Parking Aid display on the Easy Connect
system screen.
Parking aid plus
assists the driver by giving
visual and audio warnings about obstacles
detected in front of and behind the vehicle.
The bumpers are fitted with sensors. When
an obstacle is detected, it is indicated by au-
dible signals and in the Easy Connect system
›››
Fig. 238
.
When moving close to an obstacle, it is pos-
sible to know if the obstacle is in front of the
vehicle or behind it by choosing different
sounds.
The approximate measurement range of the
sensors is:
1.20 m
1.60 m
0.90 m
As you approach the obstacle, the frequency
of the audible signals will increase. The signal
will sound continuously at around 0.30 m:
Stop!
If separation is maintained, the warning vol-
ume reduces after about 4 seconds.
In order to view the entire periphery of the
vehicle, the vehicle must be moved a few
metres forwards or backwards. Thus, the
missing areas are screened and obstacles at
the sides of the vehicle are displayed
C
.
A
B
C
Special features of ParkPilot with Area
View
In the following situations the screened area
on the side of the vehicle is automatically
hidden:
●
When a vehicle door is opened.
●
When the ASR is switched off.
●
When there is ASR or ESC regulation.
●
If the vehicle remains stationary for more
than approximately 3 minutes.
Parking Aid operation
Fig. 239
Centre console: parking aid button (de-
pending on the version).
Manually connecting and disconnecting
the parking aid
●
Press the

button once.
»
291