Cupra ATECA, Owner'S Manual, Page: 129 / 380

Transport and practical equipment
Store the rear shelf
Fig. 106
In the luggage compartment: covers for
storing the rear shelf.
Fig. 107 In the luggage compartment: fitting the
rear shelf.
Depending on the equipment, once the lug-
gage compartment shelf has been removed,
it can be stored under the boot floor.
●
Remove the left and right covers
›››
Fig. 106
.
● Place the rear shelf in the corresponding
housing
›››
Fig. 107 .
●
Put the left and right covers in their original
position.
Variable luggage compartment floor
Fig. 108
Variable luggage compartment floor:

raised position;

lowered position.
Fig. 109
Variable luggage compartment floor: in-
clined position.
Variable floor in high position
●
To move from the low position to the high
position, lift the floor using the handle
›››
Fig. 108
1
, and pull it back until the front
of the floor has fully passed the supports
2
.
●
Move the floor forward over the supports
as far as the rear seat backrest and then low-
er the floor with the handle
1
.
Variable floor in low position
●
To move from the high position to the low
position, lift the floor using the handle
›››
Fig. 108
1
, and pull it back until the front
of the floor has fully passed the supports
2
.
● Now let the front part fall to the floor and
slide the floor forwards as far as the rear seat
backrest; lower the floor at the same time
with the handle
1
.
»
127