
Driver assistance systems
Operating the speed limiter with the
third lever
Fig. 209
On the left of the steering column: but-
tons to operate the speed limiter.
Connecting
●
Move the lever towards the steering wheel
to position
.
The last programmed speed is stored. It does
not take effect yet.
Activating the speed limiter
●
While driving, press button
1
.
The current speed is stored as the maximum
speed.
Setting the programmed speed
The programmed speed can be set:
●
Move the lever to the pressure point
to increase speed in small increments of 1
km/h (1 mph).
●
Move the lever upwards
to increase in
increments of 10 km/h (5 mph).
●
Press the button
1
to re-
duce speed in small increments of 1 km/h (1
mph).
●
Move the lever downwards
to reduce
in increments of 10 km/h (5 mph).
To change the programmed speed without
interruption, keep the lever pressed in the
direction
+
or
-
. The speed is
limited to the set value.
Switching off the speed limiter
●
Move the lever to position
.
The system switches off.
Switching off temporarily
If you want to temporarily deactivate the
speed limiter, e.g. for overtaking, move the
lever to the pressure point
or press
button
2
.
After overtaking, the speed limiter can be
activated with the previously programmed
speed by moving the lever to the pressure
point
.
Emergency brake assistance
system (Front Assist)*
Introduction
Fig. 210
On the instrument panel display: ad-
vance warning indications.
The objective of the system is to prevent
head-on collisions against objects that may
be in the vehicle’s path or minimise the con-
sequences of such impacts.
Depending on several factors and how criti-
cal the situation is, the system operates in a
staggered manner. First it warns the driver,
and if the driver’s reaction does not occur or
is insufficient, it activates independent
emergency braking.
The function is intended to prevent collisions
with parked vehicles or vehicles in the same
lane travelling in the same direction, or with
pedestrians crossing the vehicle’s path or
»
251
Summary of Contents for ATECA
