Cupra ATECA, Owner'S Manual, Page: 209 / 380

Operating modes
Function button: function
Version information
: Information about stored naviga-
tion data.
Advanced settings
: For making advanced changes to
the navigation settings.
Time display
: Indication

during route guidance.
Time of arrival
: The estimated time of arrival at
the destination is displayed.
Running time
: The envisaged travelling time to
the destination is displayed.
Status line
: View

during route guidance.
Destination
: The calculated distance to the desti-
nation is shown.
Next stopover
: The calculated distance to the
next stopover is shown.
Note: National border crossed
: Indication of the speed
limits of the country in question when crossing a
border.
Demo mode
: When the Demo mode is active and
route guidance is started, a virtual guide to the en-
tered destination may be started
›››
page 205 .
Define demo mode starting point
: If the Demo
mode is active and the vehicle is stopped, a ficti-
tious starting point can be set for the virtual
route guidance.
Function button: function
Waypoints mode
b)
: To start Offroad navigation.
a)
This functionality will depend on the country.
b) Only available on model: Navi System Plus.
Navigation in Offroad mode* 1)
Introduction
Offroad* navigation is a function for offroad
driving that provides directions in “non-digi-
tised areas” at low speeds.
Non-digitised areas are areas about which
the system does not have information for the
streets or terrain. It does not detect streets,
buildings or natural limits such as mountains
or rivers, although they may be shown on the
map.
Offroad* navigation is not suitable for driving
on conventional roads as it does not detect
one-way streets, motorway entries or similar.
Offroad Navigation Menu
Fig. 171
Offroad Navigation Menu start
Press the
SETTINGS
function button in the
main Navigation menu.
●
In the menu, press the Waypoint mode
function button.
●
The Offroad Navigation menu opens
›››
Fig. 171
.
Function buttons in the Offroad Naviga-
tion menu
Function button: function
RECORD
: Initiates the plotting of an Offroad tour.
MEMORY
: Opens a list allowing the selection of a stor-
ed Offroad tour.
EXIT
: Ends Offroad navigation.
1) Only available for the model: Navi System Plus
207