
Operation
Turn the control to the corresponding posi-
tion:
Turning the knob to the desired posi-
tion, adjust the mirrors on the driver
side (L, left) and the passenger side (R,
right) to the direction desired.
Depending on the equipment fitted on
the vehicle, the mirrors may be heated
according to the outside temperature.
Folding in mirrors.
Synchronized regulation of the exterior
mirrors
In the Easy Connect system menu, select
> Settings > Mirrors and wipers >
Mirrors
if the exterior mirrors have to be
adjusted in a synchronised manner.
●
Turn the knob to position
●
Adjust the left-hand exterior mirror. The
right exterior mirror will be adjusted at the
same time (synchronised).
●
If necessary, correct the right-hand rear-
view mirror: rotate the control to position
R
.
L/R
Tilt function for front passenger exterior
mirror*
When parking backwards, and in order to be
able to see the kerb, the passenger side mir-
ror can be automatically tilted towards the
passenger to provide a better view of the
kerb. The control must be in the position
R
for this feature to be operational.
The mirror returns to its original position as
soon as you drive forward at over 15 km/h
(9 mph) or switch off the ignition. It also re-
turns to its original position if the position of
the control is adjusted.
Storing the rear view mirror settings for
the tilt function
●
Switch the ignition on.
●
Using the Easy Connect system, key
>
SETTINGS > Mirrors and wipers > Mir-
rors
select
Lower while reversing
.
●
Select the
R
position on the control.
●
Select reverse gear.
●
Adjust the front passenger exterior mirror
so that you can see, for example, the kerb
area well.
●
Release the reverse gear.
●
The adjusted position for the rear view mir-
ror is stored.
Fold the rearview mirrors when locking the
vehicle*
The Easy Connect system, key
> SET-
TINGS > Mirrors and wipers > Mirrors
can be used to have the exterior mirrors fold
in when the vehicle is parked and locked
.
When the vehicle is locked with the remote
control, the exterior mirrors are retracted
automatically. When the vehicle is opened
with the remote control, the exterior mirrors
are deployed automatically.
WARNING
Convex or wide-angle* exterior mirrors
give a larger field of vision. However, they
make objects look smaller and further away
than they really are. If you use these mirrors
to estimate the distance to vehicles behind
you when changing lane, you could mis-
judge the distance. Risk of accident!
WARNING
Fold and unfold the exterior mirror, taking
care to avoid injuries.
1)
Regulation in right-hand drive vehicles is sym-
metrical.
118
Summary of Contents for ATECA
