Cupra ATECA, Owner'S Manual, Page: 164 / 380

Infotainment System
Activation of Full Link
Fig. 136
Full Link Setup
Fig. 137
Full Link menu
Data connection via Wi-Fi or SIM is not
necessary to establish the connection be-
tween the smartphone and Full Link.
Data connection via Wi-Fi or SIM is neces-
sary to enable all of the app features
1) .
Proceed as follows to use Full Link:
●
Switch on the Infotainment system
●
Connect the smartphone to the vehicle's
USB port using a USB cable
›››
page 224
.
●
In the main menu for the Full Link settings,
select
Activate data transfer for
SEAT apps
›››
Fig. 136 .
Finally, a message will appear stating that da-
ta transfer will commence when the device is
connected. Please note that data is transfer-
red over connections between your vehicle
and mobile device. Press
OK
. Once selected,
the technology compatible with your device
can be used.
Note
Depending on your smartphone, it may
have to be unlocked for the connection to
occur.
What should I do if it does not con-
nect?
Restart the mobile device.
Check the USB cable. Check whether the
USB cable is damaged. Check that neither
connection (USB/micro USB) is damaged or
worn.
Check that the USB ports are correctly
connected.
Check that the USB port of the
vehicle and the device are not damaged
and/or deteriorated.
●
Clean the USB ports (device and vehicle).
●
Try with another compatible mobile de-
vice.
●
Have the USB port replaced at an author-
ised dealership.
●
Have the mobile device repaired or replace
it.
1)
Using the data connection to transfer the
smartphone apps to Full Link may involve addi-
tional charges. Please check the charges with
your operator.
162