Cupra ATECA, Owner'S Manual, Page: 167 / 380

Connectivity
Requirements
In order to use Apple CarPlay™, the following
requirements must be met:
●
Make sure that you do not have Apple
CarPlay™ restricted on your device, at:
Set-
tings > General > Restrictions >
CarPlay > ON
.
● The mobile device must be compatible
with Apple CarPlay™.
Initiating the connection
In order to initiate the connection with the
device, just connect it to the Infotainment
system via the USB cable.
●
A pop-up screen will appear, which will re-
quest that you accept the device.
●
If you start the session using Apple
CarPlay™ technology, it will not be possible
to pair another device via Bluetooth
® . The
following message will appear in the main
Phone menu:
Please disconnect Apple CarPlay
first to connect a different mo-
bile phone.
Holding down the

button will start the
Apple™ voice “engine”.
To return to the basic contents of the Info-
tainment system, press the
SEAT
icon.
Android Auto™*
3
Valid for compatible Android mobile phones.
Android Auto™ is a protocol which enables
communication between a device and the
infotainment system.
This makes it possible to display and operate
content and functions on the device from
the screen of the infotainment system.
Requirements
In order to use Android Auto™, the following
requirements must be met:
● The mobile device must be compatible
with Android Auto™.
●
The Android Auto™ application should al-
ready be downloaded and installed on the
mobile device.
Initiating the connection
In order to initiate the connection with the
device, just use the USB cable to connect it
to the infotainment system and follow the in-
structions on the device to be paired.
●
The first connection to Android Auto™
must be done while the vehicle is stationary.
●
Once the first pop-up window about ac-
cepting data transfer between the car and
the device has been accepted, a message
will appear requesting that you check your
mobile device for the confirmations needed
to pair it with the Infotainment system.
●
If you are starting the session using
Android Auto™ technology, the device also
automatically connects to the Infotainment
system via Bluetooth
®
and it will not be possi-
ble to pair another device via Bluetooth ® .
Holding down the

button will start the
Android™ voice “engine”.
To return to the basic contents of the Info-
tainment system, press the

button.
Note
Some devices require a change in the USB
connection mode in order to use Android
Auto™.
●
Make sure that your device is in “Media
Transfer Protocol (MTP)” mode before it is
connected to the Infotainment system.
Note
Android Auto™ requires the use of Goo-
gle™ services, as well as certain basic appli-
cations of the Android system.
●
Make sure that you always have Google™
services updated in order to use this tech-
nology.
165