Cupra ATECA, Owner'S Manual, Page: 299 / 380

Help with parking and manoeuvring
tempt you to take any risk that may com-
promise safety. If used negligently or invol-
untarily, it may cause serious accidents and
injuries. The system is not a replacement
for driver awareness.
●
Adapt your speed and driving style to suit
visibility, weather, road and traffic condi-
tions.
●
Do not be distracted from the traffic by
looking at the screen.
●
Monitor the area around the vehicle at all
times, since the cameras do not capture
small children, animals and certain objects
in all situations.
●
The use of a number plate may interfere
in the views shown on the screen, since the
cameras' field of vision may be reduced.
●
The system will probably be unable to
represent all areas clearly.
CAUTION
●
The camera images are only two-dimen-
sional. Due to a lack of spatial depth, ob-
jects that jut out or holes on the road, for
example, are more difficult to detect or
may not be seen at all.
●
In certain circumstances, the camera
does not capture objects such as beams,
fences, posts or thin trees, which could
damage the vehicle.
●
The system displays the auxiliary lines
and boxes regardless of the vehicle's envi-
ronment, no objects are detected. The
driver is responsible for determining that
the vehicle will fit in the parking space.
CAUTION
In order to guarantee good system opera-
tion, keep the cameras clean, free of snow
or ice, and do not cover them with adhe-
sives or other objects.
●
Never use abrasive cleaning products to
clean the camera lenses.
●
Do not use hot or warm water to remove
ice or snow from the camera lenses. Doing
so could damage the lenses.
Area View system
Fig. 244
Viewing the top view system: aerial view.
There are four different views to choose
from:
Front camera area
Right camera area
Rear camera area
Left camera area
Function buttons Fig. 244 :
Exit the current display.
Adjust the display: bright, contrast and
colour.
Three-dimensional views
Depending on the equipment: con-
necting and disconnecting the ParkPilot
sound.
The aerial view is generated by combining
the images from all the cameras

›››
Fig. 244
. The aerial view can be selected
by pressing the vehicle in the area.
Select the corresponding view by pressing
the different areas
›››
Fig. 244
A
to
D
of the
aerial view or the reduced aerial view.
Conditions necessary for the use of the
Area View system
●
The doors and the rear lid must be closed.
●
The image must be reliable and clear. For
this reason, for example, the camera lens
must be clean.
●
The area around the vehicle must be clear-
ly and totally visible.
»
A
B
C
D




297