Cub Crafters CARBON CUB SS CC11-160, Maintenance Manual

Page: 222 / 356

CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
6.3.10
Manual number SSC10000AMM
Page: 8 Date: 04/18/2013
(1) REMOVAL
(a) Disconnect the hose fittings from the elbows that go into the oil cooler. Use a
backup wrench on the elbow fittings to prevent damage to the oil cooler.
(b) Loosen the hose clamp and remove the air duct.
(c) Remove the through-bolt that hold the brace and carefully remove the oil cooler.
(d) Disconnect the hoses from the oil cooler elbows.
(e) Remove the elbows from the oil cooler.
(2) INSTALLATION
(a) Apply thread sealant (EZ TURN Lubricant) to all but the most inner pipe thread
on each elbow but not on the flare fitting threads. Screw the elbows into the oil
cooler. Be very careful to start the threads properly and tighten with the elbow
pointing the proper direction.
(b) Position the oil cooler and install the fasteners.
(c) Torque the bolts/nuts.
(d) Attach the oil hose to the elbow on the oil cooler and tighten the fitting while
holding the elbow with a wrench.
3 ENGINE MAINTENANCE
No major repair or alterations, as outlined in ASTM F2483, FAR 43, or in this manual are
authorized at this time.
To obtain engineering approvals for any major repairs or alterations, please contact Cub
Crafters at:
Cub Crafters, Inc.
1918 South 16
th
Avenue
Yakima, WA. 98903
Tel: 509-248-9491
support@cubcrafters.com