Cub Crafters CARBON CUB SS CC11-160, Maintenance Manual

Page: 322 / 356

CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
6.A
Manual number SSC10000AMM
Page: A8 Date: 01/31/2011
Landing Gear Ref.
Interval
Initials
100 Special
4 Shock Absorber and Shock Cords:
- Visual inspection for broken bands, threads,
and weakness.
- If AOSS installed, refer to AOSS information
X
5 Tires:
- Visual inspection for cuts, uneven or
excessive wear and slippage.
X
6 Wheels:
- Remove, clean, check, and repack bearings.
X
7 Main Wheel Tire Pressure:
- Check pressure.
X
8 Brake Lining and Disks:
- Visual inspection for excessive wear.
X
9 Brake Lines:
- Visual inspection for chafing and security.
X
10 Tail Wheel Attachments:
- Visual inspection for tightness and safety.
X
11 Tail Wheel Fork:
- Visual inspection for looseness on bracket.
X
12 Tail Wheel Tire:
- Visual inspection for cuts and uneven or
excessive wear.
X
13 Tail Wheel:
- Remove, clean, and visually inspect for
damage and corrosion
- Functionally check tail wheel swivel lock
- Repack bearings (if applicable).
X
14 Tail Wheel Tire Pressure (applicable to the
optional tail wheel only):
- Verify pressure.
X
15 Lubricate per Chapter 6.2 X
Return To Service Ref.
Interval
Initials
100 Special
1 Install engine cowling. X
2 Install fuselage and empennage access panels.
3 Install wing access panels.
4 Verify oil level is full
5 Perform engine run-up in accordance with
operational / functional check:
- After completing, perform a walk around to
X