Cub Crafters CARBON CUB SS CC11-160, Maintenance Manual

Page: 284 / 356

CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
6.3.19
Manual number SSC10000AMM
Page: 2 Date: 10/28/2010
1. GENERAL
This chapter contains information for troubleshooting, removal, installation and adjustments of
the interior and exterior lighting systems used on the airplane.
Exterior lighting is optional. Options are incandescent navigation lights, incandescent
navigation lights with anti-collision lights, or lightweight LED Navigation with anti-collision lights.
There is one landing/taxi light on the leading edge of the left wing. The flight instruments are
unlit but glass panel and/or GPS units are integrally lighted. There is a map light located on the
upper right panel in the cockpit.
WARNING:
ALWAYS DISCONNECT THE POWER SUPPLY PRIOR TO SERVICING ANY PORTION
OF THE ELECTRICAL SYSTEM. ENSURE THAT THE MAIN POWER SWITCH IS IN THE
OFF POSITION; THEN REMOVE THE NEGATIVE BATTERY CABLE FOLLOWED BY THE
POSITIVE BATTERY CABLE.
CAUTION:
Always wear clean cotton gloves when working with light bulbs. Never allow the glass
portion of the light bulb to come into contact with exposed skin. Oils from the exposed
skin will cause premature bulb failure.