CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Manual number SSC10000AMM
6.3.6
Date: 04/24/2009
Page: 9
A – Cotter Pin
B – Castle Nut
C – Washer
D – Flap Hinge
E – Washer
F – Aileron Hinge
G – Washer
H – Bolt
Figure 6.3.6.8: Flap Hinge (continued)
Refer to Figure 6.3.6.7 and Figure 6.3.6.8
(a) Remove the cotter pin (3) and nut (4) holding the bolt (6) on the flap cone (2) and
flap hinge (1); keep the bolt (6) in place temporarily.
(b) Remove the cotter pin (A) and nut (B) holding the bolt (H) on the flap hinge (D)
and aileron hinge (F)
(c) Remove the outboard bolts first and carefully remove the flap by sliding it
outboard.
(2) INSTALLATION
1- Inboard Hinge
2 - Outboard Hinge
Figure 6.3.6.9: Flap Installation
Summary of Contents for CARBON CUB SS CC11-160
