Cub Crafters CARBON CUB SS CC11-160, Maintenance Manual, Page: 232 / 356

CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
6.3.11
Manual number SSC10000AMM
Page: 10 Date: 10/28/2010
(a) Each lever is installed onto a bolt that is mounted to the throttle lever plate (2) as
shown.
(b) Each control has spacers (8) which are secured with a AN525 screw (5),
washers (4), a bushing (9), and nylon lock nuts (6).
(c) The connecting rod (3) is secured to the throttle levers with a AN525 screw (5),
washers (4), castle nut, and cotter pin (7).
(d) The heavy duty throttle cable is secured to the clevis with an AN315 nut.
(2) LEVER INTERCONNECT LINKAGE
Figure 6.3.11.8 Throttle Interconnect Linkage
(View from the cockpit, looking outboard)
Top View - Dual Throttle Controls
Bottom View - Single Throttle Control
1 – Throttle Knob 2 – Connecting Rod
3 – Throttle Cable 4 – Throttle Lever
1
4
2
3
4
1