Cub Crafters CARBON CUB SS CC11-160, Maintenance Manual

Page: 273 / 356

CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Manual number SSC10000AMM
6.3.17
Date: 04/18/2013 Page: 5
(2) TROUBLESHOOTING
PROBLEM PROBABLE CAUSE REMEDY
Starter turns engine slowly
when cold
Weak battery
- Charge battery
- Test
- Replace, if necessary
Starter turns engine slowly
when hot Bad connection, cable, or
solenoid - Clean connections and/or
- replace faulty component
When starter engages, it
makes a loud grinding noise Starter damaged by engine
kicking back - Correct the ignition problem
- Repair or replace starter
When the starter is engaged,
there is a click and the
engine does not turn
Voltage not getting to starter
Starter solenoid defective
- Replace starter solenoid
Starter drive gear stays
engaged for some length of
time after the ignition switch
is released
Stuck starter solenoid
- Replace faulty starter
solenoid
- Replace or repair starter
(3) REMOVAL
(a) Disconnect the power cable.
(b) Unbolt the starter attachment bolts and nuts.
(c) Retain all existing attach hardware except lock washers which will be replaced.
(4) INSPECTION
(a)
Visually inspect the teeth of the starter gear and starter’s housing for damage.
(b) Visually inspect electrical connections on the starter.
(5) INSTALLATION
(a) Secure the starter using the original hardware minus new lock washers.
(b) Torque the bolts and/or nuts.
(c) Attach the power cable using the nut and new lock washer. Torque the nut.
CAUTION
Do not over torque the nut on the stud.