CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Manual number SSC10000AMM
6.3.6
Date: 04/24/2009
Page: 3
PROBLEM
PROBABLE CAUSE
REMEDY
Stall warning does comes on
at a speed less than 6 mph
above the stall
Stall warning vane not
calibrated properly
Calibrate stall warning vane
Stall warning does not work
Problem in the electric circuit,
switches or horn
Inspect and replace or repair
damaged components
3. AILERONS
(1) REMOVAL
Refer to Figure 6.3.6.1
(a) Disconnect both aileron control cables from the upper and lower aileron horns.
(b) Remove the bolts while firmly holding the aileron.
(c) Carefully remove the aileron from the wing panel.
Figure 6.3.6.1: Aileron Installation
Summary of Contents for CARBON CUB SS CC11-160
