52
Switch(config)# show interface
statistics error
Display error packets statistics (events) for
each port.
Switch(config)# show interface
statistics error [port_list]
[port_list]
Display error packets statistics (events) for the
selected ports.
Switch(config)# show interface
statistics error rate
Display error packets statistics (rates) for each
port.
Switch(config)# show interface
statistics traffic
Display traffic statistics (events) for each port.
Switch(config)# show interface
statistics traffic [port_list]
[port_list]
Display traffic statistics (events) for the
selected ports.
Switch(config)# show interface
statistics traffic rate
Display traffic statistics (rates) for each port.
Switch(config)# show interface
statistics clear
Clear all statistics.
2.5.22 Show log Command
2.5.23 Show default-config, running-config and start-up-config
Command
Command
Description
Switch(config)# show default-config
Show the original configurations assigned
to the Gateway Controller by the factory.
Switch(config)# show running-config
Show configurations currently used in the
Gateway Controller. Please note that you
must save running configurations into your
switch flash before rebooting or restarting
the device.
Switch(config)# show start-up-config
Display system configurations that are
stored in flash.
2.5.24 Show battery status Command
Command
Description
Switch(config)# show log
Show event logs currently stored in the
Gateway Controller. The total number of
event logs that can be displayed is 500.
Command
Description
Switch(config)# show battery-state
This is to show the information regarding
the battery connected, including Vendor
Name, Serial Number, Date Code, Battery
Status.
