47
2.5.19 Z-Wave Command
Z-Wave is a wireless communications specification designed to allow devices in the home (lighting,
access controls, entertainment systems and household appliances, for example) to communicate with
one another for the purposes of home automation. The section shows the configuration and displays the
status.
1.
Restore a Z-Wave configuration file via FTP or TFTP server.
Command
Parameter
Description
ICPE# z-wave copy-
cfg from ftp
[A.B.C.D] [file name]
[user_name]
[password]
[A.B.C.D]
Enter the IP address of your FTP server.
[file_name]
Enter the configuration file name that you want to
restore.
[user_name]
Enter the username for FTP server login.
[password]
Enter the password for FTP server login.
ICPE# copy-cfg from
tftp [A.B.C.D]
[file_name]
[A.B.C.D]
Enter the IP address of your TFTP server.
[file_name]
Enter the configuration file name that you want to
restore.
2.
Restore the Z-Wave of Gateway Controller back to default settings.
Command / Example
ICPE# z-wave copy-cfg from default
3.
Backup a configuration file to TFTP server.
Command
Parameter
Description
ICPE# z-wave copy-
cfg to ftp [A.B.C.D]
[file_name]
[running | startup]
[user_name]
[password]
[A.B.C.D]
Enter the IP address of your FTP server.
[file_name]
Enter the configuration file name that you want to
backup.
[running |
startup]
running:
Back up the data you’re processing
start-up:
Back up the data same as last saved data.
[user_name]
Enter the username for FTP server login.
[password]
Enter the password for FTP server login.
ICPE# z-wave copy-
cfg to tftp [A.B.C.D]
[file_name] [running |
startup]
[A.B.C.D]
Enter the IP address of your TFTP server.
[file_name]
Enter the configuration file name that you want to
backup.
[running |
startup]
running:
Back up the data you’re processing
start-up:
Back up the data same as last saved data.
4.
Set up a Z-Wave configuration and view status.
Command
Parameter
Description
ICPE# z-wave mode
exclude [0-99999999]
[0-99999999]
Under Exnclude mode, the Gateway Controller is
allowed to disconnect a sensor. At the moment, data
transmission doesn’t work. Set the time interval in
