109
Timeout:
The time in seconds the node should keep the Power level before resetting to NormalPower
level. Valid values are 1-255 resulting in timeouts from 1 second to 255 seconds.
The test section is used to instruct the destination node to transmit a number of test frames to the
specified node ID with the RF power level specified.
Test Node ID:
Type the test node ID that needs testing. The valid value is 1~255
Status of Operation:
Shows the current status of test operation.
Test Frame Count:
It contains the number of test frames to transmit to the test node ID. Valid test
frame count range is 1-65535.
3.8.2.3 Association Settings
This is used to allow a device to show the capabilities of each association group supported by a given
application resource.
