54
After a successful login, the screen appears as below.
1.
System Information:
Name the Gateway Controller, specify the location and check the current
version of information.
2.
User Authentication:
Create and view the registered user list.
3.
Network Management:
Set up or view the IP address and related information about the Gateway
Controller required for network management applications.
4.
Switch Management:
Set up switch or port configuration, VLAN configuration, QoS and other
functions.
5.
Switch Monitor:
View the operation status and traffic statistics of the ports.
6.
USB Config & Status:
Set up USB power configuration and show the status of it.
7.
MQTT Configuration:
Set up MQTT Configuration and view MQTT status.
8.
Z-Wave Congig & Status:
Set up Z-Wave Configuration and view MQTT status.
9.
System Utility:
Upgrade firmware and load factory settings.
10.
Save Configuration:
Save all changes to the system.
11.
Reset System:
Reset the Gateway Controller.
12.
Logout:
Exit the management interface.
