46
port, and all untagged traffic is
assumed to belong to this Access-
VLAN.
ICPE(config)# vlan port-based
Enable port-based VLAN.
ICPE(config)# vlan port-based
[name]
[name]
Specify a name for this port-based
VLAN.
ICPE(config)# vlan port-based
[name] include-cpu
Include CPU into this Port-Based
VLAN.
No command
ICPE(config)# no vlan dot1q-vlan
Disable 802.1q VLAN
ICPE(config)# no vlan dot1q-vlan
isolation
Disable 802.1q VLAN isolation
ICPE(config-vlan-ID)# no name
Remove the descriptive name for the
specified VLAN ID.
ICPE(config)# no vlan isolation up-
link-port [port_list]
Undo uplink ports.
ICPE(config)# no vlan port-based
Disable port-based VLAN.
ICPE(config)# no vlan port-based
[name]
[name]
Delete
the
specified
port-based
VLAN.
ICPE(config)# no vlan port-based
[name] include-cpu
Exclude CPU from this Port-Based
VLAN
Show command
ICPE(config)# show vlan dot1q-vlan
tag-vlan
Show IEEE 802.1q tag VLAN table
ICPE(config)# show vlan dot1q-vlan
trunk-vlan
Show configure trunk VLAN table
ICPE(config-vlan-ID)# show
Show the membership status of this
VLAN ID
ICPE(config)# show vlan interface
Show all ports’ VLAN assignment and
VLAN mode.
ICPE(config)# show vlan interface
[port_list]
[port_list]
Show the selected ports’ VLAN
assignment and VLAN mode.
ICPE(config)# show vlan isolation
Show VLAN isolation information.
ICPE(config)# show vlan port-based
Show port-based VLAN table.
Exit command
ICPE(config-vlan-ID)# exit
Return to Global configuration mode.
Port-based VLAN example
ICPE(config)# vlan port-based MKT_Office
Create a port-based VLAN
“MKT_Office”.
ICPE(config)# vlan management-vlan 1 management-
port 1-2 mode access
Set VLAN 1 to management VLAN
(untagged) and port 1~2 to
management ports.
