If you run the update application from installer file it means that correct file with the firmware was
already loaded and „Open App. File” button is not active. If there is only one CSMIO/IP controller in
network - the application asks to start the update automatically. If there are more controllers then
you should chose one IP address from a list to update the controller you want and click „Flash Pro-
gram”.
CSMIO/IP-S controller is protected if update fails. There is always a possibility to try again
Before update – close Mach3 program.
If you install new firmware version but you do not update with uploader application then Mach3
program during start will inform you about incompatibility between versions and communication will
be interrupted.
Plugin file update
Plugin is updated automatically during CSMIO/IP firmware installation.
Update verification
After firmware update is finished, you can start Mach3 again and open diagnostics window. In the
bottom bar, you should see your update firmware version.
C S - L a b s . c . – C S M I O / I P - S - C N C C o n t r o l l e r
Page 95
