Crown Boiler Phantom-X PHNTM210, Installation And Operating Instructions Manual

Page: 82 / 120

82
Spare Part:
R7910
Repair Control Kit
P/N 106177-01
Maximum
Light-off Heat Rate
= 4000
R7910
Repair Control Kit
P/N 106177-02
Maximum
Light-off Heat Rate
= 3000
R7910
Repair Control Kit
P/N 106177-03
Maximum
Light-off Heat Rate
= 2500 rpm
Altitude 0 - 7000 Ft. 7001 - 10,000 Ft.
Boiler Type
210
-02
210
-27
285
-07
210
-70
285
-70
Minimum Heat Rate 1370 2400 1450 1800 2400
Maximum Heat Rate 5950 5950 5560 7000 7000
Absolute
Maximum Heat Rate
6350 6350 6200 7000 7000
Light-off Heat Rate 4000 3000 2500
X. Operation
F. Changing Adjustable Parameters (continued)
WARNING
Asphyxiation Hazard. Boiler type is factory set and must match the boiler model. Only change the boiler
type setting if you are installing a new or replacement Control. The boiler type setting determines minimum
and maximum blower speeds. Incorrect boiler type can cause hazardous burner conditions and improper
operation that may result in PROPERTY LOSS, PHYSICAL INJURY OR DEATH.
Table 29: Parameters Changed Using the Boiler Type Parameter Selections:
NOTE: Maximum Modulation Rates are designed for 100% nameplate rate at 0°F (-18°C) combustion air.
Contact factory before attempting to increase the Maximum Modulation Rate.
“Press”
Modulation
Setup
button to access the following parameters:
Factory
Setting
Range / Choices Parameter and Description
See Table
29
See Table 29
Boiler Type
Boiler Size Setup
To verify the boiler size selection, a qualified technician should do the following:
1. Check boiler’s label for actual boiler size.
2. Set “Boiler Type” to match actual boiler size.
3. Select “Confirm”.
The Boiler Type parameter changes the minimum and maximum modulation settings. This param -
eter is intended to allow a user to set the parameters in a spare part Control to a particular boiler
type.