V
I D E O
B
L A S T E R
D
I G I T A L
VCR U
S E R
’
S
G
U I D E
Using External Devices: Connecting a Device with a Separate Video Output
86
Connecting a Device with a Separate Video Output
You need the supplied adapter cable for this setup.
To connect a device that has separate audio and video outputs, follow these steps:
1. Connect the supplied S-Video to RCA adapter to the video input on the Digital VCR card.
Refer to area 2 in the diagram.
2. Connect an RCA cable from the video output of your device to the video input on the
adapter connected to the Digital VCR card in the step above.
3. Connect the audio outputs from your device to the audio inputs on the Digital VCR card.
You may need an adapter cable to connect the RCA audio outputs found on most consumer
electronics devices to the Digital VCR card.
To select the Video input signal type:
1. Quit the Digital VCR application.
2. Select
Start
>>>
Programs
>>>
Creative
>>>
VB Digital VCR
>>>
Reconfigure Digital
VCR
.
3. Select the
9LGHR,QSXW
page.
4. Click the
&RPSRVLWH
radio button.
5. Click the
6DYH6HWWLQJ
s button.
6. Click the
([LW
button.
The new settings will be available the next time the Digital VCR software is launched. To
watch the external video device, select channel
(zero) on the remote control. Do this by
pressing the number
button followed by the
(
17(5
button.