V
I D E O
B
L A S T E R
D
I G I T A L
VCR U
S E R
’
S
G
U I D E
Setup Wizard Options: Video Format Selection
27
1
27(
5HPHPEHURQO\RQHLQSXWVRXUFHFDQEHVHOHFWHG,I\RXVHOHFWRQHRIWKH
9LGHR,QSXWRSWLRQVRQWKLVSDJHDIWHUVHOHFWLQJD7XQHURSWLRQRQWKHSUHYLRXVSDJH
DZDUQLQJGLDORJZLOODSSHDU7KHRSWLRQVHOHFWHGRQWKHSUHYLRXVSDJH7XQHU
2SWLRQVZLOOWKHQEHVHWEDFNWR³QRQH´
To use the Video Input as the source, select a device from the list that describes the hardware
that you are connecting to the Video Blaster Digital VCR card. The choices are:
QRQH
- the default - use this setting if you have a device connected to the RF
Tuner Antenna/Cable input of the Video Blaster Digital VCR card.
&DEOH%R[
'LJLWDO&DEOH%R[
6DWHOOLWH%R[
2WKHU
- select this if you are using equipment not described in the above
choices such as a DVD player, VCR, digital camera, or video camcorder.
1
27(
<RXPD\QHHGWRXVHWKHVXSSOLHG69LGHR&RPSRVLWHDGDSWHUWRFRQQHFW
WKH5&$FRQQHFWRURXWSXWIRXQGRQVRPHGHYLFHVWRWKLVMDFN
Video Format Selection
The video input jack on the Video Blaster Digital VCR card looks like a standard S-Video jack.
It is actually a multipurpose connector; the software sets the signal type present at this jack.
1
27(
7KLVVHWWLQJGRHVQRWQHHGWREHFKDQJHGLI\RXGRQRWKDYHDVHSDUDWH
YLGHRVLJQDOFRQQHFWHGWRWKH69LGHR&RPSRVLWHLQSXWRIWKH9LGHR%ODVWHU'LJLWDO
9&5FDUG
There are two choices:
69LGHR
- Equipment with an S-Video output normally uses a multi-pin connec-
tor.
&RPSRVLWH9LGHR
- Equipment with an Composite Video output normally uses
an RCA type connector. Use the supplied adapter cable to make this connec-
tion.
Select the format that corresponds to the video device whose output is connected to the S-
Video/Composite jack on the Video Blaster Digital VCR card.