24 of 64
CORRADI S.R.L.
- INSTALLATION MANUAL - PERGOTENDA ® MAESTRO
REV.1 - 11.2019
Fig. 26 - Motor installation
- Hang the motor/support unit (
A
) on the relevant screws (
B
) which have been previously screwed to the motor bearing crossbeam (
C
), and then tighten them;
- introduce the cable (
D
) inside the slot on the motor bearing crossbeam routing it out of the crossbeam side in the direction where it will be connected to the control unit.
A
A
A
A
B
C
C
D
D
3 CROSSBEAM INSTALLATION
