58 of 64
CORRADI S.R.L.
- INSTALLATION MANUAL - PERGOTENDA ® MAESTRO
REV.1 - 11.2019
10-15 mm
CLACK!!
1
2
3
A
A
B
C
D
22 ANTI-REBOUND SYSTEM INSTALLATION
fig.75
1
Trim the brush (
A
) support so that it begins with the brush.
2
Add the brush (
A
) in correspondence of one of the marks, measure and cut the first brush.
Measure the additional brush up to 10-15 mm from the plate on the mobile gutter side and cut.
3
Clean the surfaces on which the double-sided tape will be applied with the wipe (
B
) both on the tilting blade and on the brush support. Spread the primer (
C
) at the same points, position the tape (each strip has to
be split in two parts), remove the film and fix the brush at the brush height previously marked. Refit the tilting blades (
D
).
