39 of 64
CORRADI S.R.L.
- INSTALLATION MANUAL - PERGOTENDA ® MAESTRO
REV.1 - 11.2019
Fig. 49
- Insert the plastic elements (
A
) on the four junction sides of the gutter profile;
- if you wish to let water flow inside the pillar, it is necessary to remove the vertical part (
det. X
) having
care to follow the cutting line on the plastic component.
Note:
IMPORTANT - Each structure must feature at last 2 out of 4 drainage pillars.
A
Det. X
Fig. 50
Note: apply silicone under the plastic component before the installation to avoid any leak.
- We recommend applying silicone also inside the gutter before positioning the plastic component;
- silicon must be applied in all cases, regardless if the pillar is a drainage pillar or not.
11 GUTTER PROFILE INSTALLATION
Apply silicone
